Keychain on a backpack - simple master classes (Rabbit, Fish and Owl). Key chains with their own hands made of metal Nigella fur

Personalized keychain

Hello, dear readers of master classes in the online store 7beads - accessories for jewelry!

Today I'll show you how to do it . In the master class we will have three ideas.

Nothing difficult to create keychain with name no, so the master class will be more of an overview rather than a detailed one.

Below I will indicate the necessary fittings, but also an overview. Categories will be listed. And the choice of beads, hats and other accessories will be your choice.

So, let's start the master class: " how to make a personalized keychain with your own hands"

It will consist of three parts and as a result we will have three accessories.

Required accessories:

1. plastic, glass, stone, etc.

First master class:

We will get such a beautiful personalized keychain, in a combination of black and turquoise beads with inserts of beads with silver letters.

First of all, we take a cord of lavsan about 25 cm long. We string the beads in such an order that there is a symmetrical number of beads and caps along the edges on behalf.

Next, there will be an insert of two pendants that have holes along the edges like connectors. In our case, the pendant is a wing and a heart. We connect them with a double ring. All the necessary accessories are in our online store 7beads.

Now the pendants need to be connected in one row to the beads. We fold one end of the lavsan in half, thread the resulting loop through the hole of the heart, then thread both ends of the lavsan into the same loop. We tighten it tightly and make a couple of knots. We hide the short end of the lavsan in the nearest beads and cut off the tip.

In the same way, we attach a ring to the other end of the lavsan - the basis for a nominal keychain. We tighten, we make a couple of knots. We put three beads on the free end of the lavsan, exactly the same and in the same order as the beads that are on the edges on behalf.

We connect new beads on a cord with pendants. To do this, in the loop that needs to be passed through the hole in the wing, we stretch the end of the lavsan on which the beads are located. We tighten it tightly, make a couple of knots.

We push the end of the lavsan through a pair of beads and caps. Tighten well and cut off the end of the cord.

Our first keychain with the name "Vladlena" for keys is ready!

Second master class:

In the second master class, we will make such a cute and delicate personalized keychain with beads with the effect of cracked pink glass and a hamsa bead.

We take a pink cord from lavsan about 20 cm long. Fold it in half, put the loop through the base for the keychain, then pull the ends of the lavsan into the loop, make a couple of knots and tighten it tightly.

At one end of the cord we put on beads, hats and letters with the desired name. We tie several knots, cut off the lavsan and solder it with a lighter.

We do the same with the second cord. Do not forget to make an insert from the bead from the evil eye inside the "hamsa" bead.

Personalized keychain for "Alena" is ready!

Third master class:

And we will have a nice keychain with a name with 10 mm plastic beads, with a "clover" pendant for good luck and a bead from the evil eye.

We will need a lavsan cord about 15 cm long. We put beads, hats and letters with the desired name on it. Insert crimps between letters. They will perform a decorative function. The tip of the lavsan, which is located after the end of the name, is tied several times and soldered with a lighter. The other end of the cord remains free for now.

The second step is to fix the bead from the evil eye on the pin, cut off the extra tip of the pin with wire cutters and make a loop with the help of round-nose pliers.

We fasten the pendant on the extension chain on one side, on the other hand, the bead from the evil eye with the help of connecting rings.

We take the connecting ring, fix the first part on it, which consists of lavsan and beads. We tie the end of the cord a couple of times, cut it off and solder it with a lighter.

We attach the extension chain to the same connecting ring on one of our links.

It remains only to put the finished part on the ring - the basis for the keychain.

Our name keychain with the name "Elina" is ready!

I hope you enjoy all three keyrings. They were presented to my wonderful friends who will always carry them with them ... All the best!)

Master Class "how to make a personalized keychain with your own hands" finished!

How to surprise classmates and how to make a keychain on a backpack? Of course, cool keychains in the form of a Cat or a Cat! We have selected the most interesting options from a variety of key chains and pendants. These can be decorated not only with a backpack, but also with a briefcase or bag. Japanese key chains made of pompoms in the form of cats look very unusual.

A good idea is to make a keychain for a backpack with your own hands in the form of a Red Cat. The work is not difficult, the main thing is to learn how to make magnificent pompoms. The Japanese make such crafts using special plastic rings, which can be replaced with two mugs made of thick cardboard. In our master class, the keychain is made on an ordinary wide fork. But if you want the keychain to be bigger, take and cut 2 circles yourself. The diameter should be at least 7.5-8 cm, the hole inside should be 1.5 cm. How to make a pompom is well shown here:

Just do not forget before you wind the yarn, lay a thread, fishing line, or wire between two cardboard circles. This will make it easier for you to pull the pom-pom off after cutting.

For work you will need:

1. Acrylic yarn or wool with acrylic - 20 gr. white, 20 gr. beige, and 20 gr. Brown color.
2. 2 buttons with a diameter of 6 mm.
3. A piece of brown felt or leather for the ears and nose.
4. Clay Moment.
5. Thick needle to mark the mouth.
6. Scissors.
7. Fork at least 6 cm wide or 2 cardboard circles.
8. Wire or monofilament to tighten the pom-pom.
9. Carabiner or thick cord for attaching to a backpack.

We take a wide fork, or 2 cardboard rings (as it suits you). At the end of the fork we put on a paper holder or just a clothespin. Otherwise, all the yarn will slip off the fork. We start winding with white yarn! This will .

The winding sequence is as follows: we wrap the fork 25 times with white yarn, do not touch it, we wrap beige yarn next to it 15 times, we wind brown yarn on beige 15 times, and then beige 15 times. and finish 15 times brown.

Then we take a thin wire or monofilament and insert it into the middle of the fork, remove the clothespin and tighten the wire as much as possible, twisting it into a knot. We do not cut the ends of the wire - we will attach them to the carabiner. Next, we will cut our pom-pom.

We cut it, and carefully cut the protruding threads with scissors, align the pompom. We cut the white yarn (cat's muzzle) with scissors, trying to give it the shape of a muzzle.

It remains only to attach the ends of the wire to the carabiner. Keychain Red Cat is ready. On the video you can see in more detail how to make a keychain on a backpack with your own hands:

We will make another wonderful cat from pompons with our own hands from gray threads. In this master class, we will use plastic circles, or cut out cardboard rings. This keychain will be 7.5 cm in diameter.

For work you will need:

1. Yarn acrylic or gray wool - 60-70 gr., White - 20 gr.
2. Eyes (if not ready - can be cut out of felt).
3. Pink nose and felt tongue.
4. Scissors.
5. Clay Moment.
6. The needle is thick.
7. Carabiner or thick cord.

I remind you that 2 pieces of cardboard should be 7.5 cm in diameter. Inside there should be a hole of at least 1.5 cm in diameter. We mentally divide the cardboard template into 2 halves. We put a thin wire between the cardboard boxes to tie the pom-pom. We start winding with white yarn (cat's face). We wind white yarn only on one half of the cardboard. On top we will have gray yarn.

Then we wrap gray yarn in a circle as much as necessary so that the keychain is fluffy and elastic.

We cut along the edge of the workpiece, which we have obtained.

We tie the ends of the wire, straighten the pompom, cut off the protruding yarn. We make out the muzzle: we cut out the gray yarn a little with scissors so that the muzzle stands out more. Glue the pink nose and felt tongue. Ears can be felt from the same gray yarn or glued from felt. Mouth to do, as in the previous master class. Glue eyes.

How to cut a muzzle, you can look at the example of a pom-pom bear:

Keychain made of fabric Cat - mk

How to make key chains on a backpack with your own hands? Another option for making a keychain pendant is using hand sewing. Here we will not need a sewing machine - all the stitches are made by hand.

The pattern is very simple: one piece for the front and two identical pieces for the back. You can take any size.

For work you will need:

1. The fabric is cotton or linen.
2. Braid around the neck - 10 cm.
3. 2 black beads for the eyes.
4. Threads, scissors.
5. Sintepon or cotton wool.
6. Carabiner or thick cord.

We draw a pattern on paper. At the beginning, you need to draw a front pattern, bend it in half, and then circle this pattern, adding 0.5 cm to each half of the back.

Cut out and transfer to fabric. Trace with a pencil and cut out. Preparations are ready.

Next, with a pencil and a ruler, measuring 0.5 cm from the edge of ½ of the back, draw a line (we will sew the back along it). Stepping back 2 cm from the top ½ of the back, we also measure 2.5 cm and mark with a pencil. We will not sew these 2.5 cm (at the end of the work we will turn the product through this hole).

We fold the 2 halves of the back with the front ones inward, sew the top 2 cm.

And we also sew the lower part of the back. We iron the seam of the back. We sew a loop on the front side of the back, as in the photo:

From the inside of the front part, draw a seam line, stepping back from the edge of 0.5-0.7 cm.

We impose on top the detail of the front front to the front, and sew by hand with a “needle forward” seam.

Turned right side out and stuffed with padding polyester or cotton.

The loop should remain in the middle of the keychain made.

We stuff as tightly as possible.

We draw a nose, mustache, and a place for the eyes with a pencil.

We embroider with brown threads, sew on buttons or beads. Attach to carabiner or cord.

Among you, you will surely find an option that will be of interest to you. Sewing felt key chains is very simple - by hand, with an overcast or small seam “forward with a needle”.

trollface keychains

Production time: One day

Materials at hand: ██████████ 100%

Once on the Internet I saw a picture with paired key chains, Derp and Derpina, respectively for a guy and a girl. I did not find where to buy them, so I decided to make these key chains with my own hands. In general, guided by this article, you can make a metal keychain any shape and with any pattern, whatever you want. All the basic operations and methods that I used are applicable to create any flat metal key chains. I also described in great detail the process of etching a pattern on metal, this information can be used to etching / drawing patterns on knives and other metal objects. Next I will tell you how to make stainless steel key chains _\m/

• Sheet of metal 3-4 mm thick. I'm using an old steel chopper (shhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh! In general, machining stainless steel is already a worthy punishment ...
• Key rings
• Scotch

Tool

• Bulgarian (enough and hacksaws for metal)
• Emery wheel
• Drill
• Felt
• Sandpaper (preferably the finest)
• Polishing paste GOI
• I also use a small machine for fast surface finishing, but this is not necessary.
  Etching preparation
• Soldering iron with a narrow tip
• Pencil
• Preferably carbon paper
• Needle
  Pattern etching equipment
• 12 volt power supply and above
• Wire
• Black permanent marker

Blanks for key chains




I thought that the chopper was heat-treated (generally it is made of stainless steel), and decided to let it go. He heated it in a fire on the coals to a burgundy color and left it to cool along with the coals.







After heating on coals, the metal darkened, it was necessary to process it a little to give the smoked workpiece a metallic sheen. To do this, I made such a grinding nozzle on a small lathe: a cylindrical wooden block with a strip of sandpaper fixed to it.







Moral: if you have normal material, I don't advise you to mess around with all these releases, just do from ordinary sheet metal




By the way, in the next photo on the right on the machine lies the ill-fated chopper.









We have dealt with the material. Now we go to Google and find any pictures we need. They need to be printed (or redrawn from the monitor) on the right scale and cut. Don't forget to leave tails for attaching the rings! Apart from Derp and Derpina, I decided to make Trollface. Just on the chopper there was a place for him.







With a marker we transfer the cut out drawings to the metal







Next begins the most hardcore: key chains must be cut. Using a grinder, emery and a couple of files, after a couple of hours we achieve the desired result. I cut all three at the same time, letting them cool one by one.







We drill a hole with a small drill in the eye for attaching the ring.




Cut out, do final polishing to make keychains almost mirror-like and eye-catching. We use GOI paste. This is how it should look like










Next, let's talk about how to make a drawing on a keychain


How to draw on a keychain




• Preparing for etching. We will etch the drawing by electrolysis, for this you need to carefully protect all surfaces that are etched do not participate. I must say right away that the work is jewelry. The more small details in the drawing, the more difficult. Again we take a printed or redrawn drawing for a keychain
  

  

  
  
  

  We degrease the surface of the key fobs and blow off all the dust particles.

  
  

  And with the help of carbon paper we transfer the drawing to the keychain, fatter circle it with a pencil.
  

  You can also use a juicy marker and try to draw a drawing through the blank.

  
  

  

  
  

  

  
  

  Now carefully, without bubbles, stick adhesive tape. For this, by the way, it was necessary to degrease the surface. Adhesive tape is best to use high-quality, thick. For example, from Scotch, it is thick enough and has good adhesion. Also, leave the tape hanging from the edges for a couple of centimeters.
  

  

  
  

  

  
  

  We heat up the soldering iron. If there is no soldering iron, you can work with a hot gas or an awl. You can try a scalpel, but I think it's more difficult.
  Purpose: to trace the drawing, melting adhesive tape. Lines are easy to make, but to make an area, you need to circle it along the contour, then remove the central piece of tape with a needle.
  

  

  
  

  

  
  

  Etching pattern on a keychain

  
  

  To etch the picture, we need all the equipment listed at the beginning of the article. Poison is better outdoors, or at least by the open window on the windowsill ( chlorine will be released).
  

  

  
  

  Glue the homemade keychain to a flat surface (to the windowsill) with excess adhesive tape. Next we put the power supply and a small container with salt water.
  "Minus" We connect the power supply wire to the key fob, I just put this wire under the glued key fob, then it will be visible in the photo.
  the end "plus" We wrap the wires with cotton wool so that it does not fall out.

It is always not easy to find something in the bag of any girl, and if it is a small key, then it can take a lot of time to search for it. For a faster search, you need a large and beautiful keychain. Moreover, it will always emphasize your style and beauty. Let's see how you can make a beautiful keychain with your own hands.

How to make a keychain at home?

This world is developing so fast that we simply do not have time to keep track of everything. At the moment, there are hundreds of thousands of different key chains, from different materials, different colors, etc. We will show you how to make the simplest options, from simple and cheap materials.

How to make a leather keychain?

Prepare materials and tools:

Key ring;
- a piece of leather;
- batting;
- scissors;
- a pen;
- thread and needle;
- printed template.

1. First you need to decide what shape we want to make a keychain. Then we print the template on a piece of paper. As you can see, you can make different shapes - heart, triangle, circle.

2. Attach the skin to the template and draw the cutout area. Leather can be taken both natural and artificial. We cut out two parts of the keychain, back and front, as well as a small strip (see photo).

3. We put the two blanks together and start stitching. We introduce the needle from the inside of the future keychain to hide the knot of the thread. We begin to sew with small stitches. On one of the faces, do not forget to put a strip for the ring. Fold it in half and tuck it into the mold so that it peeks out a little and sew. Do not sew all the edges at once, because you still need to put the filler in the middle.

4. To add volume, add a little batting to the middle. And after that we sew up completely.

5. We cut off the excess thread, insert the key ring - and our keychain is ready!

How to make a beautiful fabric keychain?

To make such a wonderful and very bright keychain, we need:

Beautiful fabric;
- peltex;
- iron;
- curly scissors;
- thick tape.

Peltex is a material that adheres to the fabric under the influence of hot (iron).

1. Let's prepare the fabric of our choice. It should be well ironed from the inside. Peltex (white fabric in the photo) does not need to be ironed.

2. Using a round template, transfer the shape to the fabric.

3. We place the decor element, the letter "C" in the middle of the keychain shape. We stick in any way possible.

4. Now, we need to attach the peltex. We turn our fabric over to the other side, attach the peltex and iron it with a hot iron. Apply the iron for 15-20 seconds so that the fabric sticks well.

5. Cut out our circle shape. Prepared part and back, you can use another fabric.

6. Sew the top and bottom.

For better reliability, we stitched almost the entire circle. Do not flash everything, because you still need to insert a ribbon for the ring.

7 . Trim the edges with curly scissors.

8 . Cut off a piece of thick tape, bend it twice and insert it into the keychain. We sew again.

You can insert a key ring.

We cut off the extra threads and our keychain is ready!

How to make a lego keychain

You can also make a beautiful Lego keychain. All you need is a few Lego bricks and key rings. In order to make them convenient to hang, you can make a beautiful mount on the wall.

A small keychain is not only a practical and decorative accessory, but also a great gift! Today we have collected for you a few ideas on how you can easily and simply make a keychain with your own hands at no extra cost!

Fashion leather keychain

When planning the material and motifs for the keychain, you can choose whatever your heart desires! You can make a chic keychain without much effort, for example, from the remaining piece of leather! The material is very dense, malleable and has an aesthetic appearance. The tassel keychain will never go out of style!

A small instruction

Take a rectangular piece of leather and cut into thin strips, leaving 1-1.5 cm at the base. We coat the edge with glue and begin to gently twist the tube. Glue the ring in the middle of the keychain, as shown in Fig. above and roll ours to the very end. Upon completion of work, you can cut or trim the length of the fringe.

mini keychain

Such a cute bow is very easy to make with your own hands! To do this, you will need a small strip of leather. Pass it through the ring. Leave a seam in the middle of the keychain and glue them together. Then fix the middle with a small strip and also fix with glue. Keyring is ready!

Keychains for men

If you want to give your man a small talisman gift, then make him a keychain with your own hands! Draw the conceived figure on a piece of leather, cut it out and sew it with threads. Don't forget the loop on the ring.

Keychain made of wooden beads

For such a keychain, you will need a few wooden beads, a leather cord and a key ring. From these beads you can make crafts of any shape, color and size. It all depends on your creativity and imagination.

A small guide

Pass the cord through the ring and tie a knot, then string the beads and tie the knot again. Keyring is ready!

Wooden keychain

Wine cork keychain

Plastic keychain

To do this, you will need an empty plastic bottle, a cutter, scissors, a felt-tip pen, thread and beads for decoration, and a key ring. Draw a flower using a stencil or freehand. Cut it out, cover with paint of the desired color, make a hole in the center and thread it through the thread. Decorate the product with beads and fasten it not to the key ring! Your keychain is ready!

Keychain from beads

DIY keychain for Lego lovers!

To make such a keychain, you will need a key ring and a figure from a Lego set! Drill a hole in the toy and screw in the screw tightly, fasten the chain to the ring. Keyring is ready!

Felt keychain

Keychain from a piece of cloth