Booties sneakers spokes without seams. Slippers-sneakers with knitting needles, adidas booties with knitting needles

Keds are not only comfortable sports shoes, but also a great option for home slippers or baby booties. In this case, they are best made from soft thick yarn. The scheme and description for knitting stylish sneakers with knitting needles is given in our article!

We knit sneakers for children and newborns with knitting needles: diagram and description

In newborn babies, the mechanism of natural thermoregulation is not well developed, so they are advised to wear warm woolen socks. Instead of boring booties, you can knit fashionable and stylish sneakers. Moreover, they are suitable not only for a boy, but also for a girl, if you choose the right decor and color combination of threads.

• soft non-spiky wool blend yarn of different colors;
• stocking or circular knitting needles No. 3;
• hook number 3.

Consider knitting booties for newborns. To knit sneakers for older children, you need to increase the width and number of rows in accordance with the required size.

We collect 38 loops with a white working thread and knit the first row with facial loops. In the second row we knit a single crochet, make one yarn over, knit 17 stitches, make another yarn over, 2 stitches, yarn over, 17 stitches, yarn over, stitches. We knit the third, fifth, seventh and ninth rows with facial loops. In the fourth row we knit loops by analogy with the second, but at the beginning and at the end we knit 2 LP instead of one, and in the middle - 4 LP instead of two. In the sixth row at the beginning, middle and end we knit 3 LP, 6 LP and 3 LP, the rest by analogy with the second row. In the eighth row at the beginning, middle and end we knit 4 sts, 8 sts and 4 sts, the rest by analogy with the second row. On the needles, a total of 54 loops are obtained. We knit rows 10 and 12 with purl loops, 11 and 13 with facial loops.

Up to 23 rows we knit with facial loops, and in the 18th and 19th rows we switch to an orange thread, then again we return to a white thread.

We start knitting the front of the booties. We knit half of the loops with facial loops and put a mark with a red thread. Add two loops in the middle and turn the knitted fabric over. We remove one loop, knit 4 LP, turn the work over again. In this way, we continue to knit until 12 loops are obtained on the knitting needles. A triangular protrusion should form on the knitting needles, as in the photo - the front of future sneakers.

We close the loops and tie the tongue with white threads. We knit four rows on the sides with a blue thread, then we begin to make decreases in each row, knitting two loops at the beginning and at the end of the row. Having reached the height of the tongue, we break the thread.

We tie the side parts of the sneaker with a white thread, fill in all the protruding threads. In the same way we knit the second bootie. From threads of red color we crochet long chains of air loops. We insert the resulting laces into sneakers and tie on a bow.

Let's try to make a model of sports shoes for adults with our own hands

Slippers in the form of knitted sports shoes are a great option for both men and women. In the first case, you should choose gray, blue or black yarn, and in the second, use brighter colors and do not neglect additional decor. The following is a detailed description of the process of making cozy indoor shoes in a sporty style.

• blue, white and black yarn;
• knitting needles No. 3 and 3.5;
• hook number 3.

We start knitting with a cuff. To do this, we collect 48 loops on the knitting needles No. 3 and close them in a ring. We knit with an elastic band 1 * 1 until the required length is reached. To knit the heel, we move all the loops from the first knitting needle to the fourth and knit only on them. We turn the work and knit 24 rows with the front stitch, then proceed to decrease. In each row we knit up to 7 loops on the left, knit 2 loops together and turn the work. We continue to knit in this way until 12 loops remain on the needles.

We knit another row, then with a free knitting needle we raise 13 loops along the heel and knit them behind the back wall. We continue to knit with an elastic band on 2 and 3 needles, knitting the extreme loops together with one of the raised loops along the heel until they run out. The remaining 12 heel loops are divided in half into 1 and 4 knitting needles. We continue knitting to the toe. To form it, we make decreases in every second circular row. When there are 2 loops left on each needle, break off and tighten the working thread.

Let's get to the straps for the laces. To do this, on both sides of the sock, we symmetrically raise every second loop on the knitting needle along the edge of the beginning of the gum to the toe. We knit 4 rows with front stitch, then we form holes for the laces with the help of crochets.

From white threads, we crochet two laces from air loops about 140 cm long. On the back of the toe of future sneakers and along the slats, with the help of a hook, we lay decorative paths with white threads.

We knit the sole with knitting needles, as in the photo below. To do this, we collect 8 loops on knitting needles No. 3.5 and knit 93 rows with stocking knitting, making decreases and increases to form the part of the desired shape.

Then we knit the sides of the sole with white threads, lifting the required number of loops on needles No. 3 along the perimeter of the workpiece. After reaching the required height, close the loops with black threads. We form the white tip of the sneaker, as in the photo.

We thread the laces into the holes, tie them into a bow. We tie all the edges with a crochet to give the product additional rigidity. We lay decorative black stripes along the sole. If desired, we crochet and sew emblems with a star or decorate shoes at our discretion. Keds are ready!

Video on the topic of the article

We offer you to watch training videos on knitting various models of sneakers for children and adults with knitting needles.

Booties sneakers for baby 6-7 months. Sole length 11 cm.

• for soles - Prestige - Turkey - 70% acrylic, 30% wool, 100gr/300m
• White borders - YarnArt white - Turkey - 100% acrylic, 50 g / 150 m
• The main pink part - Bonbon classic - Turkey - 100% acrylic, 100gr/200m
• and quite a bit of black yarn for finishing.

Knitted with stocking needles No. 3, although manufacturers recommend thicker knitting needles.

Description of booties:

The sole is knitted separately. In principle, I knit the sole with a garter stitch, but then I decided to play around and knit a double sole to make it denser, i.e. I knitted 4 soles and then connected 2 by 2. On the outer part, I knitted a smaller sole pattern using shadow knitting. I connected the two parts of the sole and crocheted it with a single crochet. The crochet sole looks very pretty, but I can't crochet.

The sole was knitted according to the scheme:

dial 8 loops,
1 p- all facial
2p - edge, additive, 6 l.p., additive, edge - 10 p
3p - all facial
4p - edge, additive, 8 l.p., additive, edge - 12 p
5-11 p - 12 l.p.
12 p - edge, additive, 10l.p., additive, edge - 14p
13-19r - 14 l.p.
20 r - edge, 2 together front, 8 sheets, 2 together front, edge
21 p - 12 facial
22 p - edge, 2 together front, 6 sheet p, 2 together front, edge
23 p - 10 facial
close loops.

I tied the sole with a hook and with a white thread I scored 58 sts along the edge - 8 on the back knitting needle, 20 sts on the side needles and 10 sts on the front knitting needle. We knit the sides. I knitted with a double elastic band, with the beginning in the middle of the heel, in the same place I changed the outer to the inner side of the double elastic band. But who does not want to bother can tie the sides with a garter stitch in a circle. I knitted 12 rows with a double rubber band, i.e. It turns out 6 rows from the outside and inside. 13 row - connected the inner and outer sides of the gum - two loops together. Cut the white thread...

We begin to knit a sock using stocking stitch. We have 10 loops on the front knitting needle - we remove one loop without knitting, tie white yarn and knit 8 loops, turn the knitting, remove the first one without knitting, 7 purl loops and one more, the one that was removed without knitting. We turn knitting.
Remove 1p, knit 8 and knit another loop - already 10 loops. and so we knit, adding one loop on both sides, until there are 14 loops on the knitting needle. Now we knit like this: remove 1 loop, knit 12 according to the pattern and knit the last one together with one from the side knitting needles. And so we knit until 14 loops remain on the side knitting needles.

We transfer these loops to a pin and begin to knit the main part of the sneakers on the remaining 14 + 8 + 14 loops. We tie a pink thread and knit in stocking stitch according to the following pattern:
1 edge, 1 out, 2 persons, 1 out., 26 persons, 1 out, 2 persons, 1 out., 1 chrome.
knit 3 more rows according to the pattern. In the 5th row we make a hole for the cord and decrease for the bevel: 1 kr, 1 out, yarn over, 2 together front, 1 out, 2 together front, 24 front, 2 together front, 1 out, 2 together front, yarn over, edge. We knit the next 3 rows according to the pattern. Then again we make holes for the laces and cuts for the bevels.
We knit holes for laces and a decrease for a bevel through 4 rows. I got 5 holes for laces.
After the front row for the 4th hole and decreases for the bevels, the purl row was knitted as follows:

-k1, p1, k2, p1, k1, knit to last 6 sts, k1, p1, k2, p1, k1
-k1, k1, p2, k1, p1, knit to last 6 sts, p1, k1, p2, k1, k1
-1 cr, p1, yarn over, k2tog, p1, k1, knit to last 6 stitches, k1, p1, k2tog, yarn over, p1, k1
-k1, k1, p2, k1, p1, knit to last 6 sts, p1, k1, p2, k1, k1
close the loops with a needle in the face.

Now let's move on to the tongue. On additional knitting needles, we collect 5 loops on the inside of the side parts (8 photos) We tie a pink thread and knit 13 front loops, we knit the last 14 loop together with the first loop from an additional knitting needle. We turn the knitting - remove 1, purl 13 and knit 14 together with the first loop from an additional knitting needle. We knit in this way until the loops on additional knitting needles run out. We continue to knit the tongue with stocking stitch, but we knit the second after the hem and the penultimate one before the hem with the wrong side in the face and the front one on the wrong side. This is done so that the tongue does not twist. We knit to the desired length. I knitted a total of 30 rows with pink yarn, after which I switched to a garter stitch, and at the same time began to decrease one loop on both sides. I knitted 5 rows of garter stitch, i.e. I got 3 purl stripes, and then closed with a needle on the front side.

Finishing: On the sides, the grooves from the purl loops turned out. In them, with white yarn, I made a decorative chain stitch.
With black yarn, I made a chain stitch along the border between white and pink yarn. And a stripe in the middle of the white side. The beginning is roughly opposite the white seam.

Along the edge of the white side, she again crocheted it with white yarn, and captured both walls of the white loop on the border with the sole. If you take only one wall, then you get holes. We knit from the side of the side, and not from the side of the sole. With this harness, the booties gave stability. Here they are with me without full length in them.
Lace tied on knitting needles on 2 loops.

Every mother will agree that there is no such thing as a lot of clothes in a baby's wardrobe. And this is completely natural: for your little one you want all the best, elegant and beautiful. Despite the fact that at first children can only lie down, socks, small slippers and booties will also come in handy for them. In the article we will tell you how with a step-by-step description of the process.

Where to begin

Even if a young mother is just starting to learn how to work on knitting needles, after reading this article, she will be able to cope with knitting new clothes for her little one without difficulty. And tips on how to create knitting booties yourself, with a step-by-step description, can be found in this article.

It is really easy to do all this, especially if the needlewoman remembers that it is these shoes that have been very popular for kids in recent years. And for both boys and girls. In these fashionable boots, any toddler will look great while walking or visiting.

Even beginner needlewomen are quite capable of making knitted booties-sneakers. With a step-by-step description, it will be especially easy. It only takes three or four hours. But the result will exceed all expectations: the baby in such booties will be not only warm, but also comfortable. Outwardly, these shoes will always look original, because the choice of models of knitted sneakers is quite large.

How to choose

If you check the step-by-step description, knitting booties-sneakers can be knitted with yarn of any color (her mother can choose to her taste) - plain or picking up two or more shades. It is best to take only two colors for work: for boys, for example, white and blue are suitable, and for girls, pink and yellow. So knitted sneakers will look like real ones.

If you dress up the baby in a children's suit, then complete with booties-sneakers with laces, it will look very stylish. And when the booties are ready for your baby, you can start knitting another pair - for your friend's little one. Be sure that no mother will remain indifferent to such a handmade gift for her baby.

Preparation for work

If you decide to make knitted booties for your baby (it will be quite convenient with a step-by-step description), then for work you will need the following tools and materials:

• Yarn. Any children's shoes, like clothes, should be knitted only from high-quality yarn containing natural fibers. Then it will be soft (to understand this, you can draw a ball on your cheek when choosing - if you do not experience discomfort, the threads are suitable). In addition, the yarn must be dyed with safe dyes, otherwise the baby may have an allergic reaction.

• Thread and As a rule, the emblem and tongue of these booties are knitted separately, so they will need to be sewn on after the rest of the shoes are ready. Thanks to the needle and thread, the edges of the holes for the laces will look very neat.
• Two (or four) knitting needles or a hook - depending on what kind of knitting is planned. The size of these tools can be selected based on the knitting thread.

Foot size

So, how to knit booties-sneakers on knitting needles? A step-by-step description will be a little lower, but for now you need to decide what kind of foot the little one has.

If the baby is between the ages of birth and six months, then the length of its sole is approximately 8-10 centimeters. From six months to a year old - 11-13 cm. From a year to a year and a half - about 14-15 cm. Therefore, we will take for example the average figures - eleven centimeters.

Knit starting from the sole

1. To begin with, you should dial 34 loops of white or flesh-colored on the knitting needles and knit twelve rows. All the time - only facial loops. Only purl the last edge loop.
2. Add one loop at the beginning and at the end of the row.
3. Before the two middle loops and after them, also add one at a time.

If they check, knitting booties-sneakers with knitting needles, with a step-by-step description, then the wrong side should be done like this:

• Remove one loop, then knit one purl.
• After that, you need to knit with facial loops. The exception is the last two, which should be knitted as purl.
• The increase in loops should be done only in the front row, using the front ones, which must be crossed.

What to do next?

• After that, you need to knit two rows of facial ones, using blue threads.
• After that, two loops are facial, while using the flip technique. Only it is not necessary to do this for the entire row, but only before the beginning of its middle.
• Then again two facial loops and two together.
• Next, we knit two loops purl, not reaching the middle of the row a few loops.
• Now two more purl loops and at the end - two purl loops connected together. So it is necessary to continue until half of all the loops are on the knitting needles.

You still need to make a hole to thread the lace. On the front side, knit a row in this way: two front loops connected together, then - one crochet. And so repeat until the end of the series.

Now you need to tie the cuffs in the form of an elastic band. To do this, you need white threads. Knit according to the pattern: one front loop, one purl. And so on to the end of the row. The cuffs are made, approximately, to a width of 10-12 cm. It is no longer worth it. When everything is ready, carefully cut the thread, leaving a small piece for the seam.

The seam should be sewn using a hook. They also knit a neat lace, about 42 cm long. Then they thread it into the hole that was left earlier. In the same way, knit another kedik.

Another way to knit

How else to knit booties-sneakers on knitting needles? A step-by-step description makes it much easier for novice moms to do their job:

• Start from the sole. It is made in a circle even, with notches, or curly (here, at the beginning, they pick up 4 loops, and finish knitting with 8 loops).
• On each edge, cast on 60 loops on four knitting needles and knit with the front stitch for 6 rows.
• Then the sole is bent: loops are gradually selected from the bottom row.
• Introduce the new yarn color into the knitting at the front and separate the loops to work on the heel and toe.
• Knit 31 loops with threads of a new shade to form a spout, and then add one edge at the edges of the knitting needles.

Now knitting will be threads of a new color:

• It is necessary to knit 11 rows with an elastic band 1x1.
• In the next row, knit 8 loops, then the same number of decreases and finish the row by connecting the front loop with the wrong one.
• Turn the knitting with the toe up and continue to work with a garter stitch, the side loops must be knitted together all the time.

When the sock is ready, you need to put the thread of the main color into work:

• Now you should knit 10 rows of drawstring with purl loops.
• Close all loops, wrap the strap in half and process the side seams.
• From the edge of the sole, dial with white thread 11 loops on each side and 7 loops on the heel. You can knit the base for the foot by making the sides in garter stitch and the heel with an elastic band.
• Having reached the height of the spout, switch to the main color thread and knit 10 rows of the wrong side, for the drawstring.
• The drawstring must be carefully unscrewed, the side seams processed and the heel sewn to the toe.

Now you can thread the lace in a circle.

Since knitting is more comfortable and easier than crocheting, the usual pattern may not be needed. Such a detailed description will suffice.

Good day everyone! I propose to start our on-line on wonderful booties-sneakers. I'm Tatyana, to me on "you"!

For me, this is the first experience, constructive criticism and helpful tips are welcome!

Let's knit sneakers?

292 users took part in the survey.

I have Cotton Gold from Alize in my work, the colors are white and green. Hook Gamma 2.5

You can also knit from Jeans o YarnArt, Baby Cotton from Gazzal, Milk Cotton from Color City. And from any other yarn

Let's start our knitting with the sole, I knit according to this pattern

If your baby is already walking, it would be advisable to make the sole not white, but colored. This will save you nerves and washing powder))

While the weekend and everyone is moving away from school bustle, I propose to prepare the yarn. Who already knows how - we knit the sole of the right size, or we will start together tomorrow or the day after tomorrow

04/09/2016 on my watch 12:05
Good morning everyone! Let's start knitting booties from the sole. During the night, the hook “ran away” from me, so I took Chinese No. 3 as a replacement, in fact it is somewhere around 2.75. We collect the number of air loops (VP) you need, plus 3 lifting loops. In my case, I knit on a foot of 11 cm, scored 16 VP + 3. In the 5th loop from the hook, we begin to knit double crochets (CCH), we knit 14 CCH, we knit 6 CCH in the last VP, then again 14 CCH (when knitting, we immediately hide the tip of the thread, laying the thread under the columns (I hope it’s clear)), next. VP knit 5 CCH and knit a connecting column, closing the knitting.

Second row - 3 VP lifting, 14 CCH, then in each of the 6 loops we knit 2 CCH, 14 CCH, in each of the 5 loops 2 CCH, plus one more CCH in the next. loop, connecting post. Second row completed

Third row. 3 VP lifting, 14 SSN. Next, alternate - CCH, 2 CCH in one loop, CCH, 2 CCH in one loop, CCH, 2 CCH in one loop and back in mirror order. 14 dc, dc, 2 dc in one loop, dc, 2 dc in one loop, dc, 2 dc in one loop and back in a mirror order, we do not knit the last dc, but make a connecting column. We cut the thread. Our sole is ready.


We knit two such details.

15:03 . The dishes are washed, the daughter is put to bed ..)
We start knitting the sidewalls of the sole. We attach a white thread, approximately in the center, three lifting VPs. We knit a row of CCHs behind the back wall of the loop (in the photo it is drawn in yellow), we close it. Next, two lifting VPs and knit a row of half-columns with a crochet (PSN). We do not knit the last loop, we make the final broach with a thread of the second color (green in my case), and a connecting post. We do not break the white thread. Two lifting loops, a row of PSN, we cut the thread. Also at the end we attach a white thread, and we knit another row of PSN. We cut the thread.
Do not forget to weave all the ends in the process, so that later you do not waste time processing them.

PSN - loop on the hook, yarn over, pull out the trace. loop and knit everything together.

05/09/16 10:57
Good morning everyone!!
It's time to form the toe of our booties. I knit it like this

We fold our part in half, determine the middle. Pay attention to the side seams of your booties looking inward. In the 11th loop we attach a white thread, 2 VP lifts, and then we knit two CCHs with a common top. In total, we will have 10 of these, we are finishing a row of 1 CCH.
2 VP lifting, we unfold the knitting, and again we knit two CCHs with a common top five times. We unfold the knitting (I do not make lifting loops) and collect all the loops on the hook, stretch the thread and tighten.
Next, be sure to knit one row with single crochets (RLS). I usually get 11-13 loops. This is necessary so that the transition to the tongue is beautiful and smooth.

We attach the green thread and begin to knit PSN (half-columns with a crochet) tongue. In height, the tongue is approximately equal to the distance to the end of the booties.

We knit the side part.
Row number 1. We attach the green thread to the last loop of the tongue (in the photo No. 1), 2 lifting VPs, we knit PSN. Next, I make reductions in the ankle area. I determine the middle, count 5 loops to the right and knit 2 dc with a common top. Then 3 PSN, then mirror - 3 more PSN and again 2 PSN with a common top. I made only two decreases, but more can be done (make more decreases in the next row). So the heel of our sneakers will not bulge back. We knit PSN to the end of the row, the last PSN in the first loop of the tongue (photo No. 4)

Row number 3. 2 VP lifting, knit PSN in all loops to the end of the row

We alternate rows 2 and 3. We get a smooth bevel and symmetrical holes for the lace. If you need a sharper bevel, you can skip two loops, but I have not tried it yet)

In height, the side part should be slightly lower than the tongue

06/09/16 12:42 Where are your boasts? Show!

It remains to tie the lace. For me, the most beautiful is when they pick up a chain of VP and knit CCH. But I'm too lazy to tie it
I knit like this - there are two threads in the work (optional - one color or two). The first loop, then we throw one thread on the hook with a movement FROM MYSELF, and with the second thread we knit a loop on the hook and yarn over. Then we repeat these two movements. The cord turns out to be denser than just from the VP.

Every mother makes sure that her child is comfortable and warm from the first days of his life. This simple master class on knitting booties-sneakers on knitting needles will be on the shoulder even for a beginner needlewoman, because it will take only 4 hours to make them. And step-by-step instructions with a detailed description of the work will help to avoid difficulties. DIY knitted booties can be a great gift idea for a friend who has her own toddler.

Knitting captivates with its simplicity and convenience. Any thing in the baby's wardrobe will be useful, as children grow up quickly. You can approach the decoration of ready-made sneakers with imagination, decorating them with a stylish ornament, bright embroidery or a recognizable logo, for example, from Adidas.

1. Yarn. Particular attention must be paid to the choice of threads from which the booties will be knitted. Choose yarn made from natural fibers that are soft and pleasant to the touch. It can be: acrylic, a combination of wool with acrylic, a combination of acrylic and cotton. Pay attention to the composition of the threads: they must contain only safe dyes. In order for booties-sneakers to turn out bright and stylish, you need to choose at least 2 different colors of yarn that harmoniously combine with each other.
2. Needle with threads of different colors. Ready-made knitted booties will lack only a few details: a "tongue" and an emblem, so they will need to be sewn on. Also, using a darning needle, you can carefully process the edges of the holes for the laces.
3. Spokes. In this master class for knitting booties with knitting needles, you will need 2 knitting needles. Their size should correspond to the thickness of the yarn chosen for knitting.
4. Foot length. In order to determine the set of loops, you need to know the size of the baby's foot. Approximate data are given in the table:

Description of work

For this master class, knitting needles No. 3, Merino yarn 100% 145m / 45g, pale blue and white were used.

We start knitting the product from the sole. The length of our baby's foot is 11 cm, so you need to dial 32 loops on the knitting needles with white yarn. We knit 1 row with purl loops (since after a set of loops, the wrong side is facing us). You will also need to divide knitting conditionally into 2 parts. Since cast on 32 stitches, there will be 16 stitches in each half. Then, for convenience, it is necessary to mark the border between them (for example, to pin a pin).

• 1st row: remove 1 edge loop, then only the front ones, we knit the last loop with the edge (purl);
• 2nd row: remove 1 hem, knit 1 purl, then front loops to 2 central loops, we knit them with purl, then only front ones, we knit the penultimate loop with purl, 1 edge;
• 3rd row: remove 1 edge, add 1 front crossed from the broach (but not yarn over, you need to pick up the broach between the 2 loops of the previous row with the right knitting needle, transfer it to the left knitting needle, then insert the right knitting needle behind the back wall of this loop and knit the front one, that's why it is called "crossed"), then all the loops must be knitted to 2 central loops, before and after them add 1 front crossed from the broach, and knit the central loops themselves, before the edge knit 1 front crossed from the broach (not yarn over !), then 1 edge loop;
• 4th row: remove 1 hem, knit 1 purl, then we knit all the remaining loops up to 2 central ones with facial, 2 central ones we knit with purl, then we knit all loops with facial ones, we knit the penultimate loop with purl, 1 edge.

Important: the addition of loops occurs only in the front row, and only the front crossed from the broach, if you add loops, making a crochet, then “holes” will appear in the canvas. In the purl rows, the loops are not added.

Then knit 2 rows in height with a blue thread (in 7 and 8 rows).

Then we move on to the next step:

To leave a loop for the lace, it is necessary to knit in the next row: knit ~ 2 front loops together, work 1 yarn over, then repeat from ~ to ~ until the row ends.

Then you need to start knitting the lapels of the booties: we knit an elastic band 1x1 (alternating 1 front loop and 1 purl loop).

Having connected 10 cm in height, we close all the loops. Then we leave a thread long enough to sew a seam, and cut it off.

We carry out a seam. Using white yarn, we knit a chain of air loops with a hook - the future bootie lace is approximately 42 cm long. Gently thread it into the holes.

Finished work: