How to clean timberlands. How to clean timberlands at home: good shoes - good care How to clean timberlands at home

Timberland Shoe Care Tips

These 7 Boot Care Tips will help you - your boots will always look like new!

Advice 1.

We do not recommend washing your shoes with water. Classic yellows are made of nubuck material. Nubuck is a fleecy leather thatresembles suede, but is less afraid of moisture. Nevertheless, it is better not to wipe the boots with water, since water and the materials that we like to use for cleaning shoes (sponges, rags) contribute to the abrasion of the lint, the moisture-proof impregnation layer and the formation of waste stars.

Tip 2.

It is advisable to treat clean nubuck boots with moisture protection agents. The effect of these means is as follows: water falling on the shoe does not absorb into it, but rolls down, i.e. "Repels"

Tip 3.

If a dirt stain appears on the boot, let it dry and then removedirt with a special nubuck brush with a rubber bristle. It is advisable to use the rubber side of the brush, because the side with the metal bristles can damage the nubuck surface. SideThe new sides of the brush do an excellent job of cleaning the seams and the place where the shoe meets the sole.

Tip 4.

For stubborn, unnatural dirt (not dirt, stains from drinks, food ...), use a special suede and nubuck foam. Choose high-quality foam that will not leave stains on your boots!

Tip 5.

Also, a special nubuck eraser can help with strong dirt (a regular soft eraser does a good job)

Tip 6.

Wipe the sole with water and soapy water!

But do not touch the very surface of the nubuck boot.

Tip 7.

Inspect boots and clean them at least once every few days! Then they will look their best! Carry a brush with you, it takes up very little space in your bag! Love to take care of your shoes. They also love and want their esali! :)

SO 7 EASY STEPS: How do I clean my Timberland boots?

Timberland boots should be cleaned once a week, especially if you wear them daily.

1. We remove dirt and debris. Use a special brush or cloth to remove dirt from the surface of the shoe, as well as from the sole where gravel may have gotten.
2. We take out the laces. Remove the laces and clean them by hand or put them in the washing machine.
3. We clean the sole. Rinse the outsole under water, then use any dish soap and an old toothbrush to remove the dirt from the outsole tread. Then rinse the sole with warm water and air dry.
4. We clean the upper part. Use wet wipes to wipe down the tops of your boots. Then let it dry. If you have timberland suede boots, use a Timberland foam cleaner; if leather shoes - a special cream that must be applied with a sponge or applicator.
5. Drying the boots. After cleaning and using special products, the boots should be air-dried or with a special nubuck shoe dryer. Using a folk remedy - stuffing shoes with crumpled newspapers and putting them on a battery overnight - is not suitable for such shoes. The boots can deform, lose their appearance and even crack.
6. Removing scratches. Surface scratches are easy to remove - just use a shoe eraser. Wipe with an eraser until the scratches disappear.
7. We apply a water-repellent impregnation.

As you can see, Timberland care is no more difficult to care for than any other shoe, and Timberland shoes are as practical and durable as anyone else.

In our online store, you can buy products on the go for Timberland boots, in the section: Product catalog, Shoe care products.

Cleansing foam for nubuck Collonil 790 rubles.

Description:

Collonil universal cleaning foam in soft packaging with a spray.
Suitable for smooth leather, suede, velor, nubuck
Delicately cleans stains and dirt without damaging the surface, additionally takes care of the product.

Water-repellent impregnation Saphir 490 rubles.

Description:

Saphir water-repellent impregnation, 250 ml.

Provides reliable protection against moisture and dirt for your Timberland boots. Provides a very long-lasting water-repellent effect. Prevents water, snow and salt stains.

Elite class Saphir water-repellent impregnation RUB 590

Description:

Elite class water-repellent impregnation from Saphir. Provides reliable protection against moisture and pollution for your Timberland. Provides a very long-lasting water-repellent effect. Prevents water, snow and salt stains.

Instructions for use:

Shake the can before use. Spray evenly over the entire surface of the cleaned shoes at a distance of 20 cm for a few seconds, without letting them drain. Allow to absorb without drying out. Then repeat the procedure until the skin is completely hydrated, until the skin inside the product becomes slightly damp. Leave to fully saturate for several hours. Then apply any shoe care product. Further use of the impregnation as needed.

Saphir eraser for cleaning nubuck 390 rubles.

Description:

Saphir eraser is intended for local cleaning of suede, velor, nubuck products. Allows to remove stubborn dirt.
Treat (against the lint) a section of the boot surface, then brush it off.

SAPHIR is a brand of professional French cosmetics for leather goods, providing comprehensive skin care, from protecting new items to restoring the oldest and worn-out items.

Timberlands are among the five best shoes in the world. For many years they have been incredibly popular. Almost every teenager in the world puts them on their legs during the fall-winter season. Such excitement is fully justified, because the boots not only look stylish, they also have high frost resistance, reliability and water resistance. Having bought these, you will definitely not go wrong. However, sooner or later you will have to face the question, is it possible and how to clean, care for, handle and wash timberland at home? We assure you that this is quite possible, and now we will tell you how to do it.

Proper cleaning

Often people try to clean Timberlands like they usually clean their skin, which is absolutely wrong. You need to remember about the nuances that can arise with nubuck and oil-nubuck (the materials from which such shoes are made).

The most important rule is regularity. Get rid of contamination immediately, because sometimes even specialists cannot cope with a very neglected situation.

Preparatory stage

It is very important to prepare a little before cleaning Timberlands at home, as 50% of getting a good result depends on this:

1. The first step is to dry your shoes until they are completely dry. To do this, place spacers inside the shoe (so that no deformation occurs). Leave it in a well-ventilated area, or better yet, in the shade outside.
2. The second step is to clean the dirt with a dry brush. If this is not done, then when proceeding with cleaning, you simply smear it.

How to clean nubuck timberlands?

This material is similar to suede, but is highly water resistant. If you have purchased nubuck timberlands, you need to purchase a special product that maintains this characteristic and repels water.

Important! Spray them on shoes immediately after purchase and every time before going outside.

However, it can only save from water; pollution and damage must be fought as follows:

• If you can, then you need to remove traces of dirt as soon as possible before it dries. This is best done with a special brush, but you can also use a regular toothbrush. Use a sweeping motion. After - moisten the timberlands with a damp cloth and let them dry.
• If the dirt has dried out, you can remove it in the following way. Dilute the lather with a teaspoon of salt. Apply it to dirt and leave until the surface is saturated. All that remains is to remove traces of dirt with a brush.
• A regular eraser (stationery) eraser will help get rid of scratches.

How to clean oil nubuck timberlands?

Timberlands made of oil nubuck are also very popular.

Important! The peculiarity of this material lies in the fact that it has a special fat layer, due to which the shoes become less susceptible to dirt.

Cleaning procedure:

• The main rule for caring for this model is to always carry a brush with you, since if dirt does appear on the surface, it will quickly be absorbed and it will be quite difficult to remove it.
• Cleaning also needs to be done with a special or toothbrush, as well as a soft cloth with an eraser.
• It is a good idea to purchase an aerosol care product. This can be done at any industrial store.

Important! Remember to test your chosen product on an inconspicuous area of ​​the shoe.

Cleaning rules:

• Avoid getting the Timberlands completely wet as they can deform. That is why you cannot clean under running water.
• If you decide to use a stain remover or any other chemical agent, then remember that you can use it only after “dry” cleaning with a regular brush.
• As for the choice of a means to clean the timberlands from dirt, then it must necessarily be intended for nubuck.
• You need to apply funds first to a brush, cloth or sponge and only then to shoes, but not vice versa.
• In no case should you put shoes on a battery or use any other electrical appliances for drying, as they may cause timberlands to lose their original characteristics, become coarse and deformed.

Important! To fix and prolong the result, the last step in cleaning is to saturate the timberlands with a moisture-repellent impregnation.

Old stains

Unfortunately, you can get rid of a stain that has been on this shoe for a long time only with a solvent, but its use will have a very detrimental effect. It is for this reason that if you did not succeed in removing the dirt in time, then it is best to paint over the stain.

Timberland boots have been gaining popularity for 40 years. Initially, this model was intended for foresters, and its main function was reliability, water resistance, frost resistance and, of course, convenience. But after so many years, this model of yellow boots has become so popular among young people that they honorably occupy their fourth place in the ranking of the best shoes in the world.

Classic Timberlands are practical footwear for active people who cannot imagine their life without movement. Thanks to the use of high-quality materials, the legs in them do not get tired even after many hours of walking, they are quite light, wear-resistant (the average service life is indicated by the manufacturer 7-12 years), warm (if we take into account the winter model), not afraid of either snow or rain, no dirt, no scratches.

For the manufacture of these shoes, 2 types of material are used: nubuck and oil-nubuck. But no matter how super qualities this shoe is, it still needs special care. Therefore, in this article we will tell you how to clean Timberlands properly at home.

Shoe care should begin at the time of purchase. To do this, it is necessary to treat the surface with a special water-repellent agent. If you take care of your shoes regularly in this way, they will delight you with their beautiful appearance for more than one year. No need to spare the product, cover the entire surface tightly, and then let it dry for 12 hours.

How to properly clean nubuck timberlands

Nubuck is a type of fleecy leather that surpasses suede in quality due to its moisture resistance. These shoes must be taken care of in order to maintain their original appearance. And the most important action that you should take before going outside is treatment with a special agent that repels water for nubuck. However, this will not save it from contamination, so they will still need to be cleaned. How can this be done correctly?

1. If your shoes are smeared with dirt, you should use a special brush, one side of which is presented in the form of a brush, and the other - with rubber "fingers". You should let the shoes dry well, and then rub them with a brush in places of contamination, as if combing them out without pressing too hard. With it, you can also lift the pile in shiny places. But if you do not have such a brush, you can temporarily use a toothbrush.
2. Special foam removes dirt well from nubuck shoes. To do this, apply the chosen product by rubbing it into the shoes. It should be completely wet from the thoroughly applied product, and then, after complete drying, brush lightly with a brush to remove any residual product.
3. Another tool is a special nubuck eraser. It is necessary to care for Timberlands, regardless of pollution. Walk it at least once a month for prophylaxis, it will help freshen up the look and structure of the material of your boots. The eraser is also indispensable if minor scratches appear. Rub the damaged area and the scratch will disappear.

How to clean oil nubuck

Boots made of oil-nubuck are very popular. The main advantage of this material is that during its manufacture, a specialized fat composition is applied, which makes the shoes less prone to dirt, thereby making it easier to care for them at home.

1. It is quite possible to process such a model of Timberlands, like leather shoes, with a standard cleaning brush, and wipe it with an ordinary damp cloth.
2. It is worth noting that for cleaning, you should still buy an aerosol product suitable for oil nubuck.
3. Carry a brush with you for cleaning, as dirt on such surfaces will bite in and will be very difficult to remove later.

The sole also needs separate care, dirt can be washed off with soapy water using a regular sponge.

In conclusion, it should be noted that the care of Timberland footwear must correspond to its quality, and it will be important to purchase high-quality care products.

Timberland Boots- the most popular type of footwear among those who, after spending enough time outdoors, need durable and functional footwear. Timberland boots are made for extreme conditions and are not afraid of bad weather. Rather you will outgrow than it will be possible to demolish them. Nevertheless, Timberlands need cleaning and proper care. Because this way they will look presentable and last longer.

Timberland produces branded shoe cleaning products. Among them are shoe polish in several color options, perfectly matching the color as well as cream Renewbuck for suede boots, sprays and aerosols. They are most suitable for caring for Timberland boots, but there are also inexpensive analogues.

How do I clean my Timberland boots?

Timberland Boots need to be cleaned once a week, especially if you wear them daily.

1. Removing dirt and debris... Use a special brush or cloth to remove dirt from the surface of the shoe, as well as from the sole where gravel may have gotten.
2. We take out the laces... Remove the laces and clean them by hand or put them in the washing machine.
3. We clean the sole... Rinse the outsole under water, then use any dish soap and an old toothbrush to remove the dirt from the outsole tread. Then rinse the sole with warm water and air dry.
4. We clean the upper part... Use wet wipes to wipe down the tops of your boots. Then let it dry. If you have timberland suede boots, use a Timberland foam cleaner; if leather shoes - a special cream that must be applied with a sponge or applicator.
5. Drying the shoes... After cleaning and using special products, the boots should be air-dried or with the help of special nubuck shoe dryer... Using a folk remedy - stuffing shoes with crumpled newspapers and putting them on a battery overnight - is not suitable for such shoes. The boots can deform, lose their appearance and even crack.
6. Removing scratches... Surface scratches are easy to remove - just use shoe eraser... Wipe with an eraser until the scratches disappear.
7. Apply water-repellent impregnation.

As you can see, caring for Timberland boots no more difficult than for any other footwear, and in terms of practicality and durability, Timberlands are not inferior to anyone.

Timberlands confidently occupy a leading place among footwear around the world. Millions of people prefer this particular brand due to its high performance, durability, convenience and stylish appearance.

But, no matter how high-quality shoes are, they need systematic care to maintain an aesthetically beautiful appearance and maintain their reliability and frost resistance. We will talk about how to clean Timberlands at home today.

Many who have purchased nubuck or oil-nubuck shoes mistakenly clean them like leather. But, this is not true. These materials require a special approach and knowledge of specific nuances. the main rule is systematic cleansing after each going out.

Small particles, dirt and dust settle on the surface every day, and if you don't put your shoes in order every night, it will be very difficult to cope with the problem of dirt and stains in the future.

Important! Never wash your boots under running water. Thus, you will only smear the dirt, and as a result of drying, the boots will deform.

Preparing shoes

It should be understood that nubuck and oil-nubuck timberlands are non-leather shoes, from which you wiped off the dirt with a damp cloth and you're done. Fifty percent of the success of high-quality cleaning depends precisely on the preparatory stage:

1. First you need to thoroughly dry your shoes... The use of electric heating devices and dryers is strictly prohibited, as they deform the boot and make the material hard. It is best to dry your boots in a well-ventilated area or outdoors, but always in the shade. Direct sunlight will cause color fading.

Important! Before putting the shoes to dry, we advise you to insert spacers into them or stuff them tightly with paper / newspapers. This little trick will help prevent the boot from warping during drying.

2. After the timberland is completely dry - proceeding to the second step - dry cleaning... Take a sufficiently hard brush and, as it were, sweep away the dirt from the surface with a sweeping motion. It is better to purchase a special brush for cleaning these materials, but, at worst, a toothbrush is also suitable.

Remember! In the preparatory stage, contact of shoes with water is excluded - only dry cleaning. If this is not done, then during processing, you will simply smear the dirt over the surface.

Cleaning nubuck timberlands

Nubuck is similar in appearance to suede, but has an increased level of water resistance. If you have purchased nubuck timberlands, you should immediately take care of special water repellents that can be bought in any store or supermarket.

Important! Treat only a clean surface every time before going outside.

But, it is worthwhile to understand that these sprays are not a panacea, and they can save only from moisture.

Dirt, dust and damage can be removed with the following simple tricks:

• Always take your shoebrush with you to clean the surface immediately if dirty. Next, wipe with a damp cloth or napkin and let dry.
• If the dirt still managed to "get through" deeper and had time to dry, then you need soap foam, salt and all the same brush. Make a solution of foam and salt and apply it to the surface. Do not rub right away. Wait for the liquid to absorb and dry. Only then can you start dry brushing.
• Scratches on shoes spoil the look of Timberlands., but for this problem, we have found a solution. An ordinary eraser (eraser) comes into play. Walk it over the scratched places, applying a little effort and there will be no trace of the defect.

Advice! In order to freshen up the appearance of the shoe, experts recommend using an eraser monthly to treat the entire surface. Take a note if you want timberland to be as good as new at all times!

Oil nubuck

Oil nubuck is a relatively new material, endowed with resistance to dirt, thanks to a special impregnation. But this does not mean that you can wander through puddles and mud in them. After all, if the dirt is absorbed, and does not cope with the resulting stain in time, then it will be practically unrealistic to do this in the future.

Remember a couple of simple rules:

Always wear a brush to clean and for the slightest contamination use.

Wipe oil nubuck timberlands a damp cloth is possible and even necessary.

Once a month, clean the surface with an eraser or a special silicone brush.

Don't forget about aerosols designed for daily care. Sprays will help maintain the original appearance of the shoe and its performance.

Important! When buying a new aerosol, always test it on an inconspicuous area of ​​the boot and only then proceed with the full treatment.

Cleaning rules

In order for the Timberlands to serve for more than one year, there are a few basic rules to keep in mind:

Under no circumstances can be washed under running water... Otherwise, the shoes may deform.

In case of heavy dirt, it is allowed to use stain removers and other chemicals.... But, the products should be applied on a brush or sponge, and not on the surface and only after dry cleaning.

Choose care products exclusively for nubuck or oil-nubuck... Expensive, high-quality and world-famous aerosols, creams and more for leather products, leave it for another occasion!

Express drying with batteries and other heating elements is prohibited! Better to leave to dry naturally in a well-ventilated area.

Advice! In order for the cleaning not to be in vain, and the result to last longer, we advise, as a final stage, to treat the shoes with moisture-repellent impregnations and aerosols.

Old stains on shoes

Old stains on shoes are a huge problem and not easy to tackle.

It is possible to get rid of old dirt only with the help of a solvent.

Important! The method is radical and the result is unpredictable... Therefore, the most logical thing is to simply paint over the defect with a special spray.

Can nubuck be restored?

There is no definite answer to the question. It all depends on the degree of salting. If the areas are fairly small and barely noticeable, then a rubber brush or eraser will come to the rescue. Just rub the areas well and the nubuck will "fluff up" again.

If the flooding zones are strong, you can resort to the second method. You will need a stiff brush, eraser and steam. Heat a pot of water and hold the boot at a distance of thirty centimeters for a few minutes. After that, take a good walk first with an eraser, and then with a hard brush. Under the influence of high temperatures and humidity, the villi will fluff.

Important! Do not overdo it and use excessive force. Otherwise, you will not restore the timberland coating, but render the shoes unusable.

Timberlands are stylish, versatile and finicky at the same time. She needs systematic, comprehensive care in order to maintain the original appearance and characteristics. But, knowing the little tricks, everyone can cope with it!