Smart home appliances - how vacuum cleaners work. How to choose a Zelmer brand vacuum cleaner How to assemble a Zelmer vacuum cleaner for wet cleaning

Washing vacuum cleaners belong to a separate category of equipment that allows not only wet cleaning of premises, but also washing windows, cleaning upholstered furniture. They are simply irreplaceable where pets and children live, especially in multi-room apartments, cottages, etc.

As you know, the work of any technique is based on certain principles. Also, this or that technique may have its own operating characteristics. Therefore, it is necessary to find out for yourself how the washing vacuum cleaner washes, how to properly clean the apartment with it, for which surfaces of the room it is best to use it so that unnecessary problems do not arise. It is also important to know which surfaces are generally prohibited from cleaning with a washing vacuum cleaner.

Principle of operation

Usually, all washing vacuum cleaners have two containers, one of which is filled with water just before cleaning. During operation, water from the container through a hose enters under pressure into the nozzle and is evenly distributed over the desired area of ​​the surface, which should be cleaned. Then the same, but dirty water returns back to the vacuum cleaner, getting into the second container through special channels. This is the principle of the washing vacuum cleaner.

It should also be noted that this technique in most cases cleans the air well with the help of a specially provided filter, sometimes even more than one.

Features of operation

Some indoor surfaces do not like moisture, so they should not be cleaned with a washing vacuum cleaner. These are parquet, laminate (without a special coating), carpet. This is explained by the fact that water can get into the space between the boards and the joint of the covering parts. Gradually, the material will soften and deteriorate. Therefore, before figuring out how a washing vacuum cleaner works, you should pay attention to the nature of the surfaces on which it will be used.

You should also add the following: tiles, latex carpets, stone floors, textiles can be well cleaned with a washing vacuum cleaner.

Room cleaning

Before starting cleaning, you must assemble the vacuum cleaner according to the manufacturer's instructions. Next, you need to pour water into one of the tanks of the vacuum cleaner. You can fill in water with the recommended detergent. Then, if it is a carpet, you must first vacuum it without using water to remove most of the dirt. And then the turn will come for such an important action as the work of a washing vacuum cleaner. It is used for wet cleaning of carpet or other surface. After cleaning, it is necessary to dry everything that was cleaned with a vacuum cleaner.

If it is necessary to clean upholstered furniture, then you should put the appropriate nozzle and select the mode of the minimum water supply.

Even if the house is cleaned every day, the dust will still reappear. The question arises, how to make it so that cleaning does not take very long? When cleaning carpets, furniture, and other surfaces with a simple vacuum cleaner, you will likely not achieve a satisfactory result. To achieve it, it is necessary to use a washing device, since it is it that will clean many surfaces without much difficulty. So, how to use a washing vacuum cleaner?

1. Today, all washing vacuum cleaners work according to the same principle. So that you can start using the vacuum cleaner it is necessary to pour water into a special tank... The containers in the vacuum cleaner, depending on the design, can be located either side by side or in different sections. There are cleaning vacuum cleaners in which a reservoir for clean water can be located inside a container for used water.
2. At the first stage of cleaning, water is sprayed over the surface to be cleaned using a special nozzle. Then you need turn on the mode responsible for suction into the waste water tank previously sprayed water together with dust. If the quality of the work done does not satisfy you, you need to add clean water and repeat the cleaning process again.
3. The washing vacuum cleaner can also be operated in dry cleaning mode... In this situation, dust and debris are sucked up and fall into a special bag, which simultaneously acts as a filter. Having passed through it, the air is cleaned and goes outside. This mode will help when cleaning surfaces that are sensitive to moisture and moisture, such as laminate flooring.
4. If you need to clean the carpet or another similar surface, it is best to use special detergents, the cleaning effect of which greatly increases. This agent is sprayed onto the surface under a certain pressure, while knocking out fine debris and dissolving dirt. The air pressure generated by the vacuum cleaner allows the carpet to be cleaned to the full depth of the pile. After cleaning, the surface remains damp and needs to be dried, and to do this more quickly and easily, you can turn on the water collection mode.
5. In stores you can find many different cleaning agents for washing vacuum cleaners... There are, for example, disinfectants that kill mold and mildew, foaming agents that are more suitable for cleaning carpets, and antistatic agents that create a dust repelling effect.
6. Thus, a vacuum cleaner will help you clean more efficiently and with less effort than a simple vacuum cleaner.

How to use a washing vacuum cleaner Thomas (Thomas)

Today, cleaning without electrical equipment, which greatly facilitates and speeds up the process itself, is almost impossible to imagine. After all, if you can easily cope with cleaning smooth and even surfaces on your own, then upholstered furniture, fabrics, carpets, carpets and all kinds of rugs are a real challenge. You cannot clean them with a simple brush or broom, and the rags are absolutely useless here. The main cleaning assistant is a vacuum cleaner, and other equipment, such as washing vacuum cleaners or floor polishers, can take over a large scope of home care work.

Time does not stand still, and today technology allows you to simplify household chores as much as possible. Add to the list of your favorite technical helpers around the house - dishwasher, washing machine - and the vacuum cleaner so beloved by many, because today it is truly indispensable. Let's try to figure out how to properly use vacuum cleaners and other cleaning devices and what secrets there are in working with them.

Firstly, in order for the vacuum cleaner to be truly your assistant, take care of it no less than other equipment in the house. In addition to complying with all safety standards, such as storage in a dry room away from heat sources, you should also take care of the vacuum cleaner itself, keeping the surfaces clean, never leaving a full dust container or pinching the air ducts and wires to reduce the space that your vacuum cleaner.

Effective vacuuming

Many people think that the effectiveness of vacuuming depends on which nozzle is used for a particular surface. In fact, the vacuum cleaner cleans all surfaces in the same way, and for effective cleaning it is not at all necessary to buy a whole set of additional attachments, hoses and accessories. Any, even the simplest vacuum cleaner can clean surfaces of any type.

Of course, brushes of different lengths or the type of surface on different attachments can improve the efficiency of working with individual delicate coatings, but full cleaning can be done with a standard brush. The main thing is that all accessories and attachments easily pass under the furniture, be maneuverable, equipped with protective wings and rubber pads to protect the furniture itself in your home.

What really matters is the power of your technique. In order for a vacuum cleaner to cope even with difficult cleaning, effectively cleaning both flat surfaces and thick carpets, its motor must have a power of at least 750 W, but at the same time it must be equipped with a power regulator, because when working with fragile or delicate surfaces, it is often necessary to turn on a more “gentle " mode.

The dust bag should also be large and capacious, because if it is not large enough, the vacuum cleaner will fill up too quickly, which will lead to insufficient cleaning efficiency. This is the only strict requirement for vacuum cleaners, select the other parameters according to your budget and capabilities, but when buying, do not forget to check the physical parameters, because the vacuum cleaner will need to allocate storage space and whether the hose is completely removed, whether it hides inside, there is whether the sockets for nozzles, how ergonomic the design itself is and whether the vacuum cleaner can be folded into a compact package, which is very important to save space in the house.

Be sure to pay attention to the noise of the vacuum cleaner. If possible, choose silent or quiet devices that will not cause discomfort during work, not only for you, but also for your neighbors. In addition, be sure to pay attention to the weight of the equipment, because during operation you will have to move the vacuum cleaner throughout the house and this should not take too much of your energy. Also check the ease of sliding of the device on the surface, the features of the wheels and maneuverability, which will avoid frequent situations with the need to lift equipment to overcome obstacles and move around the room.

Only dry surfaces can be vacuum cleaned. Never try to vacuum hot fabrics, wet or even really wet floors. In addition, before the actual cleaning process, remove all large particles and dirt from the surface, including carefully inspect the floor for sharp objects and particles that can damage your equipment, puncturing the fabric cover of the dust container.

Make it a rule that the vacuum cleaner should not work without interruptions for more than half an hour. If the cleaning is delayed, interrupt, turn off the device and let the engine cool down for at least 5, and preferably all 10 minutes. This will extend the life of the vacuum cleaner and avoid the risk of breakdowns and loss of power.

Do not wait until the dust container is full during operation. Clean it after every procedure or room, immediately after cleaning a specific area. The more your dust collector is full, the less the amount of sucked air becomes, and accordingly the less the efficiency of dust collection is. In addition, a “loaded” vacuum cleaner begins to overheat, which greatly increases the risk of faster engine breakdown.

For optimal cleaning and dust removal as it should, never press the vacuum cleaner brush firmly to the surface of the carpet or floor. The thing is that in order for the vacuum cleaner to function normally, a sufficient flow of air must flow to the brush, along with which dust is sucked in. Therefore, the fact that you vigorously press the brush against the surface will not improve the cleaning itself, and you will spend a lot of energy. "Power" cleaning is one of the main mistakes when working with a vacuum cleaner. In fact, a vacuum cleaner is a device that is designed to facilitate cleaning and the process itself should not be difficult. Brush lightly, as if sliding along the surface.

Washing vacuum cleaner

In addition to a conventional vacuum cleaner, a washing vacuum cleaner belongs to the equipment that you can use during cleaning, which allows you to effectively carry out not only dry, but also wet cleaning. Those who have large carpets prevailing as floor coverings cannot do without such a technique.

As a rule, vacuum cleaners are large, powerful and ultra-efficient devices, but they can only be stored in the house if there are really large areas. Today, you can find compact models in home appliance stores, but their power is very low. The easiest way is to rent a washing vacuum cleaner, which will save space and at the same time achieve the desired result.

With the help of a washing vacuum cleaner, both wet and dry cleaning is carried out, cleaning and "washing" of all types of surfaces. The rules for working with it are the same as for ordinary vacuum cleaners, only when wet cleaning and working with water, you should not allow water to stagnate between periods of work and dry the brushes and containers before removing the vacuum cleaner to the place of permanent storage.

Floor polisher

For those who are faced with the constant problem of rubbing and polishing floors, a completely different electric "assistant" is suitable - a floor polisher. This is a special device that polishes the surface of natural floors after rubbing with mastic and wax. Such devices are indispensable where very large areas are covered with parquet or natural board, but this device is also suitable for rubbing laminate, tile, linoleum coverings. When working with the floor polisher, it is necessary to guide it, to ensure that all surfaces (including wheels) are clean and the water tanks dry.

How many times do not clean the house, but the dust will appear again. The question is how to make cleaning not too inconvenient. If you clean carpets and other coverings with an ordinary vacuum cleaner, then it will be problematic to achieve a good result. For high-quality cleaning in the room, you need to use a washing vacuum cleaner. Since it is he who will take over the bulk of the work, you need to know how to use it.

Almost all vacuum cleaners work according to the same principle. To prepare the vacuum cleaner for work, you need to pour water into one container. The reservoirs in the vacuum cleaner can be, depending on the design, either side by side or one above the other. There are such devices for washing vacuum cleaners, in which a container for clean water is located inside a tank for used water. At the beginning of cleaning, using a special nozzle, clean water from the first container is sprayed over the surface that you want to clean. Then, on the vacuum cleaner, it is required to turn on the mode in which the sprayed water, together with the dust, will be sucked into the container with the waste water. If you are not satisfied with the cleaning quality, add clean water and repeat the cleaning process. The washing vacuum cleaner can also be used in dry cleaning mode. At the same time, small and large debris is sucked in together with air and enters the bag, which simultaneously acts as a filter. The air, having passed through it and the folded filter, is purified. This mode should be used when cleaning surfaces that are sensitive to moisture and moisture. These can be certain types of parquet and laminate. If you need to clean a carpet or other fabric surface, it is better to use cleaning agents, this greatly increases the effect. The substance is sprayed under pressure onto the surface. Getting into the coating, it knocks out fine debris and dissolves dirt, immediately collecting it all in a container. The air pressure generated by the vacuum cleaner assists in cleaning carpets to the full depth of the pile. Try to keep the vacuum cleaner at full capacity and not get very wet on the floor. After cleaning, the surface remains damp and needs to be dried. To make drying easier, turn on the water collection mode and do an additional treatment.

There are many different types of vacuum cleaner cleaners on the market. There are disinfectants that kill fungi and mold. Foaming agents are more suitable for cleaning carpets, while antistatic agents create a dust-repelling effect.

As you can see, using a washing vacuum cleaner will make cleaning your home easier and cleaner than cleaning with a simple vacuum cleaner.

An ordinary vacuum cleaner is not enough for full-fledged room cleaning and carpet cleaning. Its application has always been considered as a preliminary step before wet cleaning, which was previously done by hand.

Since the advent of washing models, it has become possible to combine these two steps and make wet cleaning quick and easy. At the same time, you need to know how to use a washing vacuum cleaner in order to fully realize all the advantages of this household appliance.

Washing vacuum cleaners are not limited to basic functions. In addition to dry and deep wet cleaning with detergent, some models are able to:

• remove large debris;
• collect liquid from the floor, other surfaces;
• clean tiles, glass, linoleum, stone, furniture from dirt;
• perform humidification, aromatization of the room;
• remove blockages in tubs and sinks.

With these options a thorough cleaning can be done. The most popular among washing vacuum cleaners are German household appliances Thomas and Polish Zelmer.

Examples of multifunctional models:

• Thomas twin tiger with wet filtration of dust, equipped with the functions of dry and wet cleaning, liquid cleaning.
• Zelmer 919.0 ST the same device in terms of a set of functions, a set of nozzles which allows you to work with soft, fleecy, stone, marble, parquet surfaces.

Technical solution

The main disadvantage of conventional dust collectors is the emission of fine dust through the outlet, which then settles in the room. In the washing version, this is eliminated by the presence of two chambers with clean and dirty water.

From the first, under pressure, water is sprayed over the surface. The second collects waste moisture along with dust and dirt. To improve the cleaning properties, detergents are added to the chamber with clean water. The manufacturer usually recommends homemade detergents. For example:

• Thomas ProTex V recommended for waterproof floor coverings, furniture upholstery.
• Thomas ProFloor designed for cleaning ceramics, PVC, and other similar coatings.

Depending on the arrangement of the parts, the washing machines have a vertical or horizontal design.

An example of an upright vacuum cleaner - Zelmer ZVC026XX... Horizontal layout of mechanisms Zelmer ZVC763HPRU with aquafilter. The German manufacturer Thomas also has similar models - vertical Thomas Prestige 20S Aquafilter, horizontal Thomas twin tiger... Both models have water filtration.

Preparation for work

Before the first use, it is necessary to conduct an external inspection for faults, check the complete set. In their absence, preparation for operation can begin. To do this, the vacuum cleaner must be disassembled in the following sequence:

1. Get the containers.
2. Pour clean water into the dirt collection tank.
3. Add detergent solution as recommended by the manufacturer.

After that, reassemble the device in reverse order and connect the attachments:

1. Install the desired nozzle on the tube.
2. Connect it to the hose.
3. Insert the hose into the corresponding socket on the body.
4. Unwind the cord, connect it to the mains.

When working with a vacuum cleaner in which there is a water filter, you also need to check the presence of clean fine filter modules, check the aquafilter itself, and when using shampoo, add an antifoam and protection against splashing into the waste water container.

Cleaning

To achieve the most effective result, follow the recommendations that will make putting things in order faster and more comfortable:

• For cleaning dry sand or other similar debris, it is better to use the dry cleaning function using a nozzle with a turbo brush.
• It is advisable to clean carpets with successive up / down movements in the direction of the pile.
• It is worth starting work from the corner farthest from the entrance, approaching the door.
• After initial cleaning, it is recommended to repeat it with clean water.
• You can speed up the drying of the cleaned surface by drying in the collection mode.

Care after application

After completing the cleaning, the device must be washed. Correct maintenance will ensure full safety and functionality, and help to avoid the appearance of unpleasant odors and mold inside the case.

This requires:

1. Disconnect the device from the network.
2. Disassemble attachments.
3. Open the lid, remove the containers.
4. Drain off dirty water.
5. Rinse and dry the tanks.
6. Collect the vacuum cleaner and store it until the next cleaning.

Features of work

Most often in stores you can find washing vacuum cleaners from Zelmer and Thomas. All such devices have aquafilters that reliably keep fine dust inside, mixing it with water.

Thomas

Some German models have a wet filtration system with an injector, which includes a water filter module, a porous element included in it and a suction cube of an aqua spray.

Before wet cleaning, the aquafiltration system must be brought into working position. For this:

• a container for collecting dirty water must be inserted into the main compartment;
• install the water filter holding the cover;
• install a block with a porous element and a suction cube;
• pour clean water into the container of the dirt collector.

You also need to make sure that the sprayer is functioning.

After cleaning, the Thomas filtration system must be disassembled. Filter elements, injection, reservoir should be rinsed and dried. Carefully wipe the working compartment with a dry cloth, and clean the lid from dirt.

Zelmer

Before cleaning, vacuum cleaners from this manufacturer require special preparation of the filter unit module:

• a partition must be installed in the dust collector chamber, the blinds of which should be directed downward;
• then you need to pour water into the container;
• at the end of the preparation, it remains to install the wet cleaning module itself.

After use, the baffle filter must be removed, washed, dried and reinstalled. After 30 hours of operation, the Zelmer water filter needs to be replaced.

The complexity of the design of Thomas machines equipped with a water filter takes time for post-harvest maintenance. This forces you to approach cleaning more thoroughly. Consider this parameter when choosing a model.